Languages
Language Key Not Found

Language Key Not Found (1)

Language Key Not Found
  • SIRIUS
    SIRIUS
  • SBOX
    SBOX
  • R1DB/R2DB
    R1DB/R2DB
  • R3
    R3
  • R4
    R4
  • R8
    R8
  • MINITAURs
    MINITAURs
  • DEWE-43A
    DEWE-43A
  • SIRIUS MINI
    SIRIUS MINI
  • SIRIUS waterproof
    SIRIUS waterproof
  • SBOX waterproof
    SBOX waterproof
  • KRYPTON
    KRYPTON
  • KRYPTON CPU
    KRYPTON CPU
  • R8rt
    R8rt
  • IOLITE
    IOLITE
  • CAN interfaces
    CAN interfaces
  • GPS and IMU devices
    GPS and IMU devices
  • Aerospace interfaces
    Aerospace interfaces
  • Video cameras
    Video cameras
  • Current transducers
    Current transducers
  • Accelerometers & angle sensors
    Accelerometers & angle sensors
  • Dewesoft X3
    Dewesoft X3
  • DSI adapters
    DSI adapters
  • EtherCAT accessories
    EtherCAT accessories
  • Battery packs
    Battery packs
  • Displays
    Displays
  • Mounting plates
    Mounting plates
Thanks for contacting us. One of our specialists will get in touch as soon as possible.

Technical drawings

KRYPTON single width
 
KRYPTON single width
KRYPTON dual width
KRYPTON one

General specifications

Communication
Data interface EtherCAT
Data Rate 100Mbit bus speed
Sync Accuracy below 1 sample to Sirius®
EtherCAT® Max. Cable Length 100m
Max. Throughput per Chain 600kS/s
Max. Number of Slices 100 (additional power injectors required)
Cabling LEMO 1T EtherCAT® hybrid cable
Single cable for Power supply
Data interface
Synchronization
Power specification
Power Supply 9-48VDC
Environmental specification
Operating Temperature -40 to 85°C
Storage Temperature -40 to 85°C
Shock & Vibration Shock: SIST EN 60068-2-27:2009 (100g, 6 ms)
Random vibration

Multi-channel units specification

Amplifier overview

STG TH RTD ACC LV DIO
Connectors DB9, L2B10f Thermocouple L0B6f BNC BNC DB25
#ch per module 3x, 6x 8x, 16x 8x 4x, 8x 4x, 8x 16xDI, 16xDO 8xDI, 8xDO
Data rate / channel 20 kHz 100 Hz 100 Hz 20 kHz 20 kHz 20 kHz
Resolution 24 bit digital
Bandwidth 0.49 fs ? ? 0.49 fs 0.49 fs
Voltage ranges ±10V, ±1V, ±100mV, ±10mV 1V, 100 mV 1V, 100 mV 10V, 5V,1V,200mV ±50 V CMOS compatible
Input coupling DC DC DC DC, AC 0.1Hz, 1Hz DC
Sensor excitation 0...15 V max. 0.4W/ch (45mA limit) IEPE 4 mA, 8 mA ?
Bridge connection Full, ½, ¼ 350Ω, ¼ 120Ω 3 wire
Programmable shunt 100 kΩ
IEPE input DSI-ACC
Resistance DSI20mA, DSI5A 10kΩ
Temperature (PTx) DSI-RTD PT100, 200, 500, 1000, 2000
Thermocouple DSI-TH K, J, T, R, S, N, E, C, B
Potentiometer
LVDT DSI-LVDT
Charge DSI-CHG
Current ext. shunt ext. shunt
TEDS
Isolation voltage Differential 1000 V 1000 V Differential 1000 V 250 V
Power consumption per module 2.4W (4W 120Ω @ 5V load) 3xSTG;
5.9W (8.9W 120Ω @ 5V load) 6xSTG
2.5 W (8xTH)
4 W (16xTH)
2.5 W 4.6 W
3.5 W (4xLV)
6.7W (8xLV)
2 W
Advanced functions Supports all strain types and high input range High voltage, high isolation High voltage, high isolation Sensor error detection, high dynamic range High sensor power and multi range
KRYPTON LV
 
KRYPTON LV
KRYPTON TH
KRYPTON RTD
KRYPTON STG
KRYPTON DIO

KRYPTON 4xLV, 8xLV

Analog input KRYPTONi-4xLV KRYPTONi-8xLV
Input type Isolated voltage
Number of channels 4 8
ADC Type 24-bit oversampled SAR with 41 kHz anti-aliasing filter
Sampling Rates Simultaneous 20k, 10k, 5k, 2k, 1k, 500, 200, 100 S/s (software-selectable)
Voltage Range ±50 V
Accuracy ±0.03% of reading ±5 mV
Offset Accuracy after Balance Amplifier 0,15 mV
Typ. SNR (10 kS/s, -1 dBFS sine wave @1 kHz)
104dB
Typical noise floor@10kS -110,4 dB
Type. THD (10 kS/s, -1 dBFS sine wave @1 kHz)
-104,9 dB
Type. SFDR (10 kS/s, -1 dBFS sine wave @1 kHz)
105,5 dB
Typical CMR@400Hz/1kHz 105dB/94dB
Gain Drift Typical 10 ppm/K, max. 20 ppm/K
Offset Drift Typical 5μV/K,10μV/K
Gain Linearity <0.01%
Inter-channel Phase Mismatch 0.02° * Fin[kHz]+0.1°
Input Coupling DC
Input Impedance 1 MΩ
Noise 0.7mVRMS
Overvoltage Protection In+ to In-: 200V continuous, 350Vpeak(100msec)
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
Additional Specifications
Input Connector BNC
Isolation Voltage 1000 Vpeak channel/ground & channel/channel
Environmental Rating (see 1) IP67
Amplifier type KRYPTONi-4xLV KRYPTONi-8xLV
Power Consumption 3.8 Watt 6.8 Watt
Weight 700g 1000g
Slice Dimensions 213x39x56 mm 213x54x56mm
Dimensions with Connectors 213x39x66.8mm 213x54x66.8mm
1) Depending on the mating connector types

KRYPTON 8xTH, 16xTH

Analog inputs KRYPTONi-8xTH KRYPTONi-16xTH
Input type Isolated universal thermocouple and voltage
Number of channels 8 16
ADC Type 24bit delta-sigma
Sampling Rate Simultaneous 100S/sec
Voltage Ranges ±1V ±100mV
Input Accuracy ±0.02% of reading ±10 μV ±0.02% of reading ±10 μV
Typical Noise Floor@10/100 s/sec 115/106 dB 110/106 dB
Gain Drift Typical 3 ppm/K (max. 10 ppm/K)
Offset Drift 0.03 μV/K
Gain Linearity <0.01%
Input Coupling DC
Input Impedance 1 MΩ
Thermocouple
Input type TC Types: K, J, T, R, S, N , E, C, B
Accuracy ±0.02% of reading ± 0.5 °C ± 10 μV
Resolution <0.001°C
Sampling rates 100, 80, 40, 20, 10 s/sec
Typical Noise 0.007 °C RMS@Type K @10 s/sec 0.02 °C RMS@Type K @100s/sec
Additional Specifications
Input connector Mini Thermocouple connector (copper)
Isolation voltage 1000 Vpeak channel/ground & channel/channel
Environmental rating (see 1) IP67
Amplifier type KRYPTONi-8xTH KRYPTONi-16xTH
Power consumption 2.5 W 4W
Weight 720 g 1000 g
Dimensions 213x39x56 mm 213x54x56mm
1) Depending on the mating connector types, for non corrosive liquids only, IP65 standard

KRYPTON TH accuracy

Temperature Type K Type J Type T Type R Type S Type N Type E Type B Type C
-200°C 1.19°C 1.00°C 1.18°C 1.52°C 0.95°C
-100°C 0.84°C 0.76°C 0.87°C 0.99°C 0.74°C
0°C 0.75°C 0.70°C 0.76°C 2.35°C 2.32°C 0.88°C 0.67°C 1.22°C
100°C 0.76°C 0.70°C 0.73°C 1.83°C 1.87°C 0.85°C 0.67°C 11.62°C 1.14°C
400°C 0.81°C 0.76°C 0.73°C 1.53°C 1.61°C 0.84°C 0.70°C 2.98°C 1.09°C
700°C 0.88°C 0.79°C 1.46°C 1.56°C 0.88°C 0.76°C 2.04°C 1.14°C
1000°C 0.97°C 0.86°C 1.42°C 1.53°C 0.95°C 0.84°C 1.70°C 1.25°C
1300°C 1.09°C 1.42°C 1.54°C 1.03°C 1.57°C 1.39°C
1700°C 1.55°C 1.69°C 1.57°C 1.63°C

KRYPTON 8xRTD

Analog inputs KRYPTONi-8xRTD
Input types voltage, resistor or universal Ptxxx inputs
Number of channels 8
ADC Type 24bit delta-sigma
Sampling Rate Simultaneous 100 S/sec
Voltage Ranges ±1V ±100mV
Input Accuracy ±0.02% of reading ±10 μV ±0.02% of reading ±10 μV
Typical SNR@10/100 s/sec 108/98 dB 108/98 dB
Gain Drift Typical 3 ppm/K (max. 10 ppm/K)
Offset Drift Typical 0.05 μV/K (max. 0.2 μV/K)
Gain Linearity <0.01%
Input Coupling DC
Input Impedance 1MΩ
Temperature Thermistor types PT100, PT200, PT500, PT1000, PT2000
Accuracy ±0.05% of reading ±0.2 °C
Resolution <0.001°C
Resistance 0…10kΩ 0…1kΩ
Accuracy ±0.02% of reading ±0.01% of range
Input Connection 3 wire or 4 wire
Resolution <0.001 °C
Additional Specifications
Input connector Lemo 0B 6pin EEA.0B.306.CLN
Isolation voltage 1000 Vpeak channel/ground & channel/channel
Environmental rating (see 1) IP65
Power consumption 2.5 W
Weight 720 g
Dimensions 213x39x56 mm
1) Depending on the mating connector types

KRYPTON 3xSTG, 6xSTG

Analog inputs KRYPTON-3xSTG KRYPTON-6xSTG
Input type Voltage
Full/half/quarter strain
Number of channels 3 6
ADC Type 24-bit oversampled SAR with 41 kHz anti-aliasing filter
Sampling Rate Simultaneous 20k, 10k, 5k, 2k, 1k, 500, 200, 100 S/s (software-selectable)
Voltage Ranges ±10V ±1V ±100mV ±10mV
Input Accuracy ±0.03% of reading, ±0.02% of range, ±0.1mV
Offset Accuracy after Balance Amplifier
0.2mV 0.02mV 0.01mV 0.01mV
Typical Dynamic Range@10kS 139dB 139dB 129dB 110dB
Typical Noise Floor@10kS 107dB 107dB 97dB 78dB
Typical CMR @ 400Hz/1kHz 86dB/84dB 96dB/95dB 112dB/102dB 112dB/102dB
Gain Drift Typical 10 ppm/K (max. 40 ppm/K)
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity < 0.02%
Input Coupling DC
Input Impedance 10 MΩ
Overvoltage Protection In+ to In-: 50 V continuous, 200 V peak (10 ms)
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100 dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
Excitation Voltage
Excitation voltage Free programmable (16 bit DAC)
Predefined Levels 0, 1, 2.5, 5, 10 and 15VDC
Accuracy ±0.05% ±2mV
Drift ±50 ppm/K ±100 μV/K
Stability 10% to 90% Load <0.01%
Current Limit 45mA (400mW max. Power)
Protection Continuous short to ground
Bridge Connection Types full bridge strain, ½ bridge strain, ¼ bridge strain (3-wire)
Ranges 2…1000mV/V free programmable
Internal Bridge Completion ½ bridge and ¼ bridge 120 and 350Ω
Bridge Completion Accuracy 0.05 %; TCR: 2ppm/K (others on request)
Internal Shunt Resistor 100kΩ (others on request)
Shunt Resistor Accuracy 0.1%; TCR: 10ppm/K (others on request)
Input Short, Sensor Offset Adjust Software-selectable
Additional Specifications
Input connector DB9; L2B10f
TEDs support Standard + DSI adapters
Environmental rating IP67
Amplifier type KRYPTON-3xSTG KRYPTON-6xSTG
Power Consumption 3.5W (4.8W 120Ω @ 5V load)
6xSTG: 5.9W (8.9W load 120Ω @ 5V)
Weight 740g 1100g
Slice Dimensions 213x39x56 mm 213x54x56mm
Dimensions with Connectors 213x39x58.2 mm 213x54x58.2 mm

KRYPTON 16xDI, 8xDI 8xDO, 16xDO

KRYPTONi-16xDI KRYPTONi-16xDO KRYPTONi-8xDI-8xDO
Digital Input
Isolated Input Channels 16 8
Compatibility CMOS Configuration
Input low level UIN < 0.8V
Input high level UIN > 2.4V
Input high current @5V UIN < 1.8 mA
Input high current @30V UIN < 6 mA
Propagation delay < 1 μsec
Sampling rate Simultaneous 20kS/sec
Overvoltage protection 40V continuous (65V peak)
Isolation voltage peak 250V channel/ground & channel/channel
Digital Output
Isolated Output Channels 8 16
Compatibility Open collector with 10kΩ pull-up to +5V
Maximum sink current 150mA (not protected)
Maximum switching voltage 50V
Propagation delay < 20μsec
Maximum update rate depending on EtherCAT master
Isolation voltage peak 250V channel to ground, no channel to channel isolation
General Specifications
Environmental rating IP67
Power consumption 2 W
Weight 700 g
Slice Dimensions 213x39x56 mm
Dimensions with Connectors 213x39x58.2mm

Single-channel units specification

Overview

AO DI DO ACC STG LV HV TH-HV CNT
Connectors BNC DSUB15HD Male DSUB15HD Female BNC DB9 BNC Banana jack Thermocouple L1T7f
#ch per module 1 4 4 1 1 1 1 1 1
Data rate / channel 1000Hz 40 kHz 40 kHz 40 kHz 40 kHz 40 kHz 40 kHz 100Hz 100Hz
Data interface EtherCAT, 100 Mbit/s
Data interface connectors
Lemo 1T (1 cable for data, power and sync, daisy chainable)
Resolution 18 bit digital digital 24 bit 24 bit 24 bit 24 bit
Bandwidth Analog 50kHz 0.49*fs 0.49*fs 0.49*fs 0.49*fs
Voltage ranges ±10V 5V ±10%
12V ±10%
±10V
±5V
±1V
±200mV
±50V
±10V
±1V
± 100mV
±50V
±10V
±1V
±100mV
±1000V
Power supply 9 -50 V 9 -50 V 9 -50 V 9 -50 V 9 -50 V 9 -50 V 9 -50 V 9 -50 V 9 -50 V
Power consumption 2W 1.5W 2W 2W 3W 1.5W 1W 1.3W 1.2W
Temperature range -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C
Storage temperature -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C
Dimension 62x56x29 mm 62x56x29 mm 62x56x29 mm 62x56x29 mm 62x56x29 mm 62x56x29 mm 62x56x36 mm 62x56x36 mm 62x56x29 mm
Weight 250 g 250 g 250 g 250 g 250 g 250 g 250g

General specifications

General specification
Data interface EtherCAT®
Data rate 100 Mbit/s
Data interface connectors Lemo 1T (1 cable for data, power and sync, daisy chainable)
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
Environmental specification
Power supply 9 V to 50 V
Environmental rating IP67
Shock and vibration rating > 100 g
Temperature range -40 to 85°C
Weight 250 g
Dimensions 62x56x29 mm (HV, TH-HV 62x56x36 mm)
1xAO
 
1xAO
4xDI
4xDO
1xACC
1xSTG
1xLV-BNC
1xHV
Analog output specification
DAC Resolution 18 bit
Sampling Rate 1000 S/sec
Number of channels 1
Full Scale Output Range (see 1) ±10 V
Analog bandwidth 50 kHz
Accuracy (typ.) 0.1%±1mV (0 to 20 mA load)
Temperature gain drift (typ.) ±10 ppm/K
Temperature offset drift (typ.) ±5 uV/K
SNR @1000 S/s output rate 92 dB (sine wave, 250 Hz, +-9 V)
THD -90 dB
Output impedance 0.45 Ohm DC
Maximum output current 20 mA
Settling time (0.05% of set value) 30 us @ 1000 Ohm load, -10 V to 10 V step
Max slew rate 2.5 V/us @ 1000 Ohm load
Max capacitive load (2% overshoot) 10 nF
Maximum load 500 Ohm
Output protection Short circuit protected
Additional Specifications
Output connector BNC
Environmental rating (see 2) IP67
Power consumption (typ.) 2 W
Weight 250 g
Dimensions 62x56x29 mm
1) Only DC output voltage, function generator not supported
2) Depending on the mating connector types
Inputs
Input type Digital
Input Channels 4
Compatibility TTL / CMOS Voltage Levels
Input low level UIN < 1 V
Input high level UIN > 2 V
Input high current @5 V UIN 3 mA typ.
Input high current @ 30 V UIN 6 mA typ.
Propagation delay < 1 us
Max. sampling rate 20 kS/sec
Overvoltage protection 30 V Continuous, 65 V peak
Isolation voltage Functional Isolation CH-CH and CH-GND
Non-Isolated Power Supply
Output Voltage +5 V 5 V +/- 10 %
300 mA max. (see 1)
Output Voltage +12 V 12V +/-10 %
100 mA max. (see 1)
Output Voltage +Vecat EtherCAT Bus Supply Voltage
200 mA max. (see 1)
Additional Specifications
Connector DSUB15HD Male
Power consumption 1.5 W typ.
Weight 250 g
Dimensions 62x56x29 mm
1) Max. combined load on +5V and +12V pins: 1.5 W reduced by the load already present on +Vin pin
Digital ouptut specifications
Number of output channels 4
Maximum update rate depends on EtherCAT master cycle time
Output type open collector with active internal pullup to 5 V
Sink max 50 V, 2 A (resistive load, unprotected)
Source: 5 V, max. 40 mA (internally limited)
Max. switching frequency for internal PWM 100 kHz
Isolation galvanically isolated channel-ground
Non-isolated power supply (front connector) specifications
Output voltage +5V 5V +/-10%
300 mA max. (see 1)
Output voltage +12V 12V +/-10%
100 mA max. (see 1)
Output voltage +Vin Vin
200 mA max. (see 1)
Additional Specifications
Front connector DSUB15HD Female
Power consumption 2 W typ.
Weight 250 g
Dimensions 62x56x29 mm
1) Max. combined load on +5V and +12V pins: 1.5 W reduced by the load already present on +Vin pin
Analog inputs
Input types Voltage, IEPE
Number of channels 1 (isolated)
ADC Type 24bit SAR with anti-aliasing filter
Sampling Rate Simultaneous 40kS/sec per channel (software-selectable)
Voltage Ranges ±10V ±5V ±1V ±200mV
Typ. Input Accuracy ±0.03% of reading ±0.02% of range ±0.1mV
Offset Accuracy after Balance Amplifier 0.1mV 0.03mV 0.01mV 0.001mV
Typ. SNR (10 kS/s, -1 dBFS sine wave @1 kHz) 90 dB 90 dB 89 dB 88 dB
Type. SFDR (10 kS/s, -1 dBFS sine wave @1 kHz) 113 dB 110 dB 109 dB 106 dB
Typ. Noise floor@10kS -100 dB -99 dB -99 dB -98 dB
Typical CMR @ 400Hz/1kHz -130/-120 dB -122/-119 dB -104/-97 dB -90/-84 dB
Gain Drift typ. 10ppm/K (max. 40 ppm/K)
Offset Drift typ. 0.3 μV/K + 5 ppm of range/K (max. 2 µV/K + 10 ppm of range/K)
Gain Linearity < 0.02%
Input Coupling DC, AC 0.1 Hz, 1 Hz
Input Impedance 1 MΩ
Isolation 125 Vrms channel to ground isolation
Overvoltage Protection In+ to In-: 50V continuous, 200V peak (10msec)
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
IEPE input
Excitation 4 mA, 8 mA
Compliance voltage 24 V
Output Impedance
Sensor detection Shortcut: <4V; Open: > 19V
Additional Specifications
Input connector BNC
TEDs support IEPE mode only
Environmental rating (see 1) IP67
Power Consumption 2 W
Weight 250 g
Dimensions 62x56x29 mm
1) Depending on the mating connector types
Analog inputs
Input types Voltage, full bridge strain, half bridge strain, quarter bridge strain
Number of channels 1 (isolated)
ADC Type 24bit SAR with anti-aliasing filter
Sampling Rate Simultaneous 40kS/sec per channel (software-selectable)
Voltage Ranges ±50V ±10V ±1V ±100mV
Input Accuracy ±0.03% of reading, ±0.02% of range, ±0.1mV
Offset Accuracy after Balance Amplifier
0.35mV 0.1mV 0.01mV 0.001mV
Typical SNR @ 10kS/s 89.12 dB 88.72 dB 88.86 dB 87.60 dB
Typical Dynamic Range@10kS 100dB 110dB 130dB 145dB
Typical Noise floor@10kS -102.8 dB -99.6 dB -103.1 dB -99.8 dB
Typical CMR @ 400Hz/1kHz -71dB/-66dB -72dB/-66dB -96dB/-88dB -96dB/-87dB
Gain Drift Typical 10 ppm/K (max. 40 ppm/K)
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity < 0.02%
Input Coupling DC, AC 1Hz
Input Impedance 1MΩ 20MΩ
Isolation
Overvoltage Protection 200V 50V
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
Excitation Voltage
Excitation voltage Free programmable (16 bit DAC)
Predefined Levels Unipolar 0 - 24V, Bipolar 0 - 12V
Accuracy ±0.05% ±2mV
Drift ±50ppm/K ±100μV/K
Stability 10% to 90% Load <0.01%
Current Limit 42mA (400mW max. Power)
Protection Continuous short to ground
Bridge Connection Types full bridge strain, ½ bridge strain, ¼ bridge strain (3-wire)
Bridge ranges 20…10000mV/V free programmable
Internal Bridge Completion ½ bridge and ¼ bridge 120 and 350Ω
Bridge Completion Accuracy 0.05 %; TCR: 2ppm/K (others on request)
Internal Shunt Resistor 100kΩ (others on request)
Shunt Resistor Accuracy 0.1%; TCR: 10ppm/K (others on request)
Input Short, Sensor Offset Adjust Software-selectable
Additional Specifications
Input connector DB9
TEDs support Standard + DSI adapters
Environmental rating IP67
Power Consumption 2.8W
Weight 250 g
Dimensions 62x56x29 mm
Analog inputs
Input types Voltage
Number of channels 1 (isolated)
ADC Type 24bit SAR with anti-aliasing filter
Sampling Rate Simultaneous 40kS/sec per channel (software-selectable)
Voltage Ranges ±50V ±10V ±1V ±100mV
Input Accuracy ±0.03% of reading, ±0.02% of range, ±0.1mV
Offset Accuracy after Balance Amplifier
0.11 mV 0.01 mV 0.0014 mV
Typical SNR @ 10kS/s 96.97 dB 96.15 dB 94.10 dB 88.69 dB
Typical Dynamic Range@10kS -130 dB -132 dB -137 dB -138 dB
Typical Noise floor@10kS -108.3 dB -102.6 dB -107.2 dB -100.1 dB
Typical CMR @ 400Hz/1kHz
Gain Drift Typical 10 ppm/K (max. 40 ppm/K)
Offset Drift Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Gain Linearity < 0.02%
Input Coupling DC, AC 1Hz
Input Impedance 1MΩ 20MΩ
Isolation
Overvoltage Protection 200V 50V
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
Additional Specifications
Input connector BNC
Environmental rating IP67
Power Consumption 1.5W
Weight 250 g
Dimensions 62x56x29 mm
Analog Input
Input types Voltage
Number of channels 1 (isolated)
ADC Type 24bit SAR with anti-aliasing filter
Sampling Rate 40kS/sec (software-selectable)
Input range ±1000V
Input accuracy
Offset Accuracy after Balance Amplifier 0.015V
Typ. Noise floor@10kS -102.8dB
Typ. Noise floor@40kS -96.8dB
Typ. CMR @ 400Hz/1kHz
Gain Drift
Offset Drift
Gain Linearity
Inter-channel Phase Mismatch
Input Coupling DC
Input Impedance 10M
Protection class CAT III 600 V; CAT II 1000 V
Overvoltage Protection +-2 KVpeak
Analog input performance
Bandwidth (-3dB) 0.49 fs
Alias-free Bandwidth DC to 0.453 fs
Alias Rejection -100dB (all sample rates)
Delay Through ADC 37 / fs
Oversampling 32
Additional Specifications
Input connector 4mm safety banana jack
TEDS support Not available
Power Consumption 1W
Weight
Dimensions 62x56x36 mm