MINITAURs technical specifications

MINITAURs MINITAURs

Get a quote

Technical drawings

Technical specifications

Analog inputs
Inputs	8 ch voltage Full/Half/Quarter bridge strain
ADC type	24 bit delta-sigma DUALCOREADC® with anti-aliasing filter
Sampling rate	Simultaneous 200 kS/sec
DUALCOREADC® Ranges (Low Range)	±10V (500 mV), ±1V (50 mV), ±100mV (5 mV), ±10mV (0.5 mV)
Bridge ranges @ 10 Vexc (Low Range)	1000(50)mV/V, 100(5)mV/V, 10(0.5)mV/V, 1(0.05)mV/V
Dynamic Range@10kS (DUALCOREADC®)	137 dB (152 dB)
Input coupling	DC
Input impedance	10 MΩ
Bridge modes	Full/Half/Quarter Br 120/350 Ω 3-wire; internal bridge completion
Internal shunt resistor	100 kΩ, bipolar to Exc+ or Exc- (others on request)
TEDS	Standard + DSI adpters
Excitation Voltage	0 to 12 VDC software programmable (16 Bit DAC), max 44 mA
Overvoltage protection	In+ to In-: 50V continuous; 200 V peak (10msec)
Digital inputs
Inputs	8 counter 24 digital Fully synchronised with analog data
Input level compatibility	CMOS, LVTTL
Input protection	±25 V continuous
Digital output	8 ch open collector, max. 100mA/30 V
CAN bus
Inputs	1 CAN port
CAN port type	CAN 2.0B full speed, read&write
Computer specifications
CPU	Intel Core i3, 1.7GHz, 3 MB cache
RAM	4GB (up to 16 GB upon request)
Storage	250 GB removable SSD
	option: 1 TB removable SSD
	option: 250 GB int. FLASH (for OS)
Power supply	9-36 VDC
Power out	same output voltage level as power in
GPS	10 Hz option, 100 Hz option, 100 Hz + RTK option
Interfaces	2x USB 2.0 4x USB 3.0 DVI-D interface for external display 2x Ethernet LAN + WLAN GPS antenna GPS display/RTK modem (DB9) EtherCAT® connector 2x Sync connector
Physical specification
Typical power consumption (max.)	11 W (20 W)
Operating temperature	0 to 50°C
Dimensions	266 x 139 x 109 mm

Language Key Not Found (1)

Technical drawings

Technical specifications