Language Key Not Found
Language Key Not Found (1)
Language Key Not Found- SIRIUS
- SBOX
- R1DB/R2DB
- R3
- R4
- R8
- MINITAURs
- DEWE-43A
- SIRIUS MINI
- SIRIUS waterproof
- SBOX waterproof
- KRYPTON
- KRYPTON CPU
- R8rt
- IOLITE
- CAN interfaces
- GPS and IMU devices
- Aerospace interfaces
- Video cameras
- Current transducers
- Accelerometers & angle sensors
- Dewesoft X3
- DSI adapters
- EtherCAT accessories
- Battery packs
- Displays
- Mounting plates
Thanks for contacting us. One of our specialists will get in touch as soon as possible.




Technical Specifications
Analog inputs | ||||
Number of channels | 8 | |||
Inputs | Voltage, bridge | |||
ADC type | 24 bit sigma delta with anti-aliasing filter | |||
Sampling rate | Simultaneous 200kS/sec | |||
Input type | Differential | |||
Voltage ranges | ±10V | ±1V | ±100mV | ±10mV |
DC accuracy | 0,05% of value +1 mV |
0,05% of value +0.2 mV |
0,05% of value +0.1 mV |
0,05% of value +0.1 mV |
CMRR@ 50Hz/400Hz/1kHz | 85dB/92dB/89dB | 97dB/97dB/88dB | 100dB/97dB/89dB | 101dB/97dB/89dB |
Sensor supply | 12V, 400mA | |||
±5V ±0.1% bridge sensor supply | ||||
Overvoltage protection | ±70V input protection | |||
Noise floor | 107dB@ ±10V range | |||
Input impedance | 20MΩ||47pF(differential) 10MΩ||33pF(common mode) |
|||
Maximum common mode voltage | ±13V | |||
Signal to noise | ||||
0.1kS/s to 51.2kS/s | 105dB | |||
51.2ks/s to 102.4kS/s | 100dB | |||
102.4kS/s to 200kS/s | 75dB | |||
Channel-to-Channel Phase Mismatch | <0.1deg @5kHz | |||
Phase-to-Phase Mismatch | 0.6deg @1kHz | |||
Counter/Digital inputs | ||||
Number of channels | 8 counters/24 digital input, fully synchronized with analog | |||
Modes | Counting, waveform timing, encoder, tacho, geartooth sensor | |||
Counter timebase | 102.4MHz | |||
Time base accuracy | Typical: 5 ppm, Max: 20 ppm | |||
Max. Bandwidth | 10MHz | |||
Input Filter | 500 ns, 1μs, 2μs, 4μs, 5μs and 7.5μs | |||
Counter resolution | 32-bit | |||
Compatibility | TTL/CMOS | |||
Configuration | Pull-up with 100kΩ | |||
Input low level | -0,7V to 0.7V | |||
Input high level | 2V to 5V | |||
Overvoltage protection | ±30V input protection | |||
CAN bus | ||||
Number of ports | 2 | |||
Interface type | CAN 2.0B, up to 1 MBit/sec | |||
Special applications | CCP, OBDII, J1939, CAN output | |||
Galvanic isolation | Isolated | |||
Bus pin fault protection | ±36V | |||
ESD protection | 8kV | |||
General specifications | ||||
Power supply | 9-36 V DC | |||
Maximum sensor power consumption | 6 W | |||
Maximum power consumption | 11W | |||
Interface | USB 2.0 interface | |||
Physical dimensions | 225x80x45 mm | |||
Weight | 720 g | |||
Operating temperature | -20 to 60 deg. C | |||
Storage temperature | -40 to 85 deg. C | |||
Storage temperature | -40 to 85 deg. C | |||
Humidity | 95% RH non condensing @ 60°C |