Languages
Language Key Not Found

Language Key Not Found (1)

Language Key Not Found
  • ADAS
    ADAS
  • Brake test
    Brake test
  • Combustion analysis
    Combustion analysis
  • Harsh environment testing
    Harsh environment testing
  • Pass-by noise
    Pass-by noise
  • Road load data
    Road load data
  • Vehicle dynamics
    Vehicle dynamics
  • Power analyzer
    Power analyzer
  • Power quality
    Power quality
  • E-Mobility
    E-Mobility
  • FFT Analyzer
    FFT Analyzer
  • FFT Analysis
    FFT Analysis
  • Modal Analysis
    Modal Analysis
  • Shock Response Spectrum - SRS
    Shock Response Spectrum - SRS
  • Fatigue Analysis
    Fatigue Analysis
  • Sound Level Meter
    Sound Level Meter
  • Octave Band Analysis
    Octave Band Analysis
  • Sound Power
    Sound Power
  • Reverberation Time RT60
    Reverberation Time RT60
  • PCM telemetry
    PCM telemetry
Thanks for contacting us. One of our specialists will get in touch as soon as possible.

Shock Response Spectrum - SRS

Mechanical shock pulses are often analyzed in terms of the shock response spectrum. The shock response spectrum assumes that the shock pulse is applied as a base input to an array of independent single-degree-of-freedom systems. SDOF system assumes that each system hat its own natural frequency.

Charge
Charge
IEPE
IEPE
Voltage
Voltage
Acceleration
Acceleration
Velocity
Velocity
Displacement
Displacement
Video
Video
High-speed video
High-speed video

Main Features

  • SELECTABLE FREQUENCY SPAN: define the calculation range for the frequency spectrum
  • FREQUENCY DIVISION (OCTAVE): define the resolution of the spectrum in the frequency domain
  • DAMPING/QUALITY FACTOR: select damping ratio or quality factor 
  •  OUTPUT CHANNELS:  composite/maximax, primary, residual
  • CALCULATED RESULTS: results in frequency domain spectrum can be shown as acceleration, velocity or displacement.​​​​​​​

Download Shock Response Spectrum Plugin | More about DEWESoft X3 software

SRS Model

The shock response spectrum is a calculated function based on the acceleration time history.

It applies an acceleration time history as an excitation to an array of single-degree-of-freedom (SDOF) systems. Each system is assumed to have no mass-loading effect on the base input.

Calculated Parameters

  • Velocity DC filter - removes the DC component of the calculated time signal
  • Remove DC offset - removes the DC component of the input time signal
  • Noise floor - calculate the noise floor of the input time signal
  • Frequency division (octave) - removes the DC component of the calculated time signal
  • Damping/quality factor - different damping factors produce different SRSs for the same shock waveform. Zero damping will produce a maximum response and very high damping produces a horizontal line

Output Channels

All the output channels are calculated for acceleration, velocity, and displacement.

  • Composite/maximax - composite shock response for the absolute maxima (absolute max, max, min)
  • Primary - forced response, computation during the shock (absolute max, max, min)
  • Residual - free vibration, computation after the shock (absolute max, max, min)

Related products