Language Key Not Found

Language Key Not Found (1)

Language Key Not Found
  • ADAS
  • Brake test
    Brake test
  • Combustion analysis
    Combustion analysis
  • Harsh environment testing
    Harsh environment testing
  • Pass-by noise
    Pass-by noise
  • Road load data
    Road load data
  • Vehicle dynamics
    Vehicle dynamics
  • Power analyzer
    Power analyzer
  • Power quality
    Power quality
  • E-Mobility
  • FFT Analyzer
    FFT Analyzer
  • FFT Analysis
    FFT Analysis
  • Modal Analysis
    Modal Analysis
  • Shock Response Spectrum - SRS
    Shock Response Spectrum - SRS
  • Fatigue Analysis
    Fatigue Analysis
  • Sound Level Meter
    Sound Level Meter
  • Octave Band Analysis
    Octave Band Analysis
  • Sound Power
    Sound Power
  • Reverberation Time RT60
    Reverberation Time RT60
  • PCM telemetry
    PCM telemetry
Thanks for contacting us. One of our specialists will get in touch as soon as possible.

Octave Band Analysis

Octave analysis is an indispensable tool for sound measurement because it gives a close approximation of how the human ear responds. Dewesoft octave analysis solution meets all of the IEC and ANSI specifications for octave filters.

Sound pressure
Sound pressure

Main Features

  • TRUE OCTAVE (ANSI, IEC): use filter sets as in analog octave analyzers and really see the dynamic behavior of the input data.
  • RESOLUTION UP TO 1/24 OCTAVE: improve the resolution by breaking the octave bands into sub-octave bands, preserving the logarithmic band spacing. 
  • FREQUENCY WEIGHTING: standard frequency weighting curves (A, B, C, D and Z)
  • AVERAGING TYPE: use different types of averaging to get more stable results (linear, peak, exponential)

Full technical specifications | More about DEWESoft X3 software

Constant Percentage Bandwidth (CPB)

CPB filter is a filter whose bandwidth is a fixed percentage of a centre frequency. The width of the individual filters is defined relatively to their position in the range of interest. The higher the centre frequency of the filter, the wider the bandwidth.

The widest octave filter used has a bandwidth of 1 octave. Many subdivisions into smaller bandwidths are often used. The filters are often labeled as “Constant Percentage Bandwidth” filters. A 1/1-octave filter has a bandwidth of close to 70% of its centre frequency. The most popular filters are perhaps those with 1/3-octave bandwidths. One advantage is that this bandwidth at frequencies above 500 Hz corresponds well to the frequency selectivity of the human auditory system. DEWESoft supports up to 1/24-octave bandwidth.

Calculation Principle

True octave(ANSI, IEC)

Uses filter sets as in analog octave analyzers. One of the main advantages is that we can really see the dynamic behavior of the input data.


Calculated using FFT as the base and is updated when every FFT is being calculated.

Frequency Weighting

Frequency weighted noise measurements offer standard ways to measure sound, and we use each of these frequency weightings for different types of measurements.

  • A-weighting is applied to measured sound levels in an effort to account for the relative loudness perceived by the human ear. The human ear is less sensitive to low and high audio frequencies.
  • B-weighting is the best weighting to use for music listening purposes.
  • C-weighting is used for high-level noise measurements.
  • D-weighting was specifically designed for use when measuring high-level aircraft noise in accordance with the IEC 537 measurement standard. The large peak in the D-weighting curve reflects the fact that humans hear random noise differently from pure tones, an effect that is particularly pronounced around 6 kHz.
  • Z-weighting is linear at all frequencies and it has the same effect on all measured values.

Averaging Type

Averaging is used to get more stable results. There are three averaging modes available:

  • Linear averaging - each FFT counts the same
  • Exponential averaging - FFT’s become less and less important with time
  • Peak hold averaging - only maximum results are stored and shown


Related products